Multifunctional Ultrasonic Drilling Monitor Diameter 400mm-8000mm

Multifunctional Ultrasonic Drilling Monitor

 

Application: Detection for width and drilling depth of diaphragm wall, bored piles; Sediment thickness.

 

Model: TS-K100DC(B).

 

Diameter Range: 400mm-8000mm.

 

Warranty: One Year.

Main function

Quality Control and integrity of drilled foundations

 

1. DRILLED FOUNDATION GEOMETRY

 

The Ultrasonic Drilling Monitor provides a visual representation of a drilled foundation excavation before pouring concrete in either wet or dry conditions.
Besides, acquisition calculations of a drilled excavation to determine shaft verticality, radius, and volume, with 360 degree, 2D and 3D profile views. The Data acquisition at a rate of approximately one scan per second with eight channels scanned simultaneously.

 

2. Quality Control of Drilled Foundations for Base Cleanliness

 

Drilled hole base cleanliness is important regarding quality control and quality assurance of the drilled shafts.

To achieve cleaning once drilling is complete, a cleanout bucket is used to remove any material unsuitable for end bearing support. Bottom inspection is then performed, often by lowering a camera down the bore hole, a procedure that gives a rough idea of the thickness of any debris left at the bottom. To improve the inspection method, this Ultrasonic Drilling Monitor quantitatively evaluates the drilled shaft base cleanliness by measuring the debris thickness based on force and displacement measurements.

Parameters
Technical Specification
UMT-K100DC ( B) Portable Winch
Winch type Automatic Power Supply AC140V~260V
Up/Down Speed 0-10m/min Depth accuracy ≤0.9mm
Bottom and casing sensing system Automatic sensing by limit switch Synchronous cable Manual cable roller
Up/down movement distance 100m / 150m optional Probe suspension the sensor device is hung by two independent steel wire rollers.
Quality(KG) 100m winch: 60KG; 150m winch: 80KG Dimension (mm) 100m winch: 660*550*700;150m winch: 840*550*700
Operating temperature -10℃~+50℃ Humidity 0~90%

 

Host unit
Power Supply Winch: AC140V~260V, 50Hz;

Host and sensor device: DC60V high energy lithium battery powered, charge 6 hours can work continuously for 24 hours.

Power Supply protection circuit Equipped with two built-in non-fuse breakers (5A and 5A), a leakage breaker (20A) and an over voltage protection circuit
Operation mode Touch screen or mouse
Display mode 12.1 inch color bright LCD, display precision 1280 * 768, adjustable back light
Processor High performance low power embedded dual core processor.
Storage 8G TF Card
Operate System Linux system
Digit interface USB2.0, to U Disk can copy files, to laser printer can print
Control function Winch rising and falling, ultrasonic transmitting and receiving, sediment probe working or stopping, etc.
Record mode Fully digit
Sound speed calibration function yes
Dimension 580mmX440mmX290mm
Quality (KG) 25KG
Operating temperature -10℃~+50℃
Humidity 0~90%

 

Multifunction sensor device

(measure the shape, perpendicularity and sediment thickness)

Measuring the shape & perpendicularity Method Ultrasonic echo sensing system
Direction Direct recording in four directions (X-X’ and Y-Y’)
Measuring Range Φ400mm-7200mm
Accuracy ±0. 2% at full scale
Ultrasonic Frequency: 90KHz; Power: 8W
Measuring sediment thickness Method Probe pressure & dip angle method
Range 0~250mm
Accuracy ≤1mm
Dimension 130mm*130mm*370mm
Quality(KG) 22KG
Operating temperature -10℃~+50℃
Humidity 0~90%

 

UMT-K100DC(B)Standard Configure
No. Name Type Qty Weight(KG) Note
1 Host unit UMT-K series 1
2 Ultrasonic Probe UMT-K100DC(B)-P 1
3 Probe Winch UMT-K100DC(B)-WP 1 100m
4 Cable Winch UMT-K100DC(B)-WC 100m
5 Analysis software U-disk UMT-UDAPro.V3.49 1
6 Host charger UMT-K Serial-C60D 1
7 Probe Case UMT-K100DC(P)-PC
8 Winch shield —— — 1
9 Winch sling —— — 2
10 Winch tray UMT-K100QC(B)-WT 1
11 Guide pulley 4 Spare parts
Advantages
  • Independently developed multi-functional integrated probe with integrated hole and groove detection and sediment detection functions; (Utility model patent: ZL 2016 2 0665728.0)
  • Independently developed synchronous printing host control box, real-time detection, synchronous printing, and the results are true and reliable; (Utility model patent: ZL 2019 2 1018370.2)
  • Hole wall 2D-3D display, flexible switching, intuitive image
  • Seamless switching between dry hole and mud hole detection, strong adaptability
  • Low maintenance cost
Details

Dry and Mud Hole

Cases
Inquiry

Contact Us